Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Agoura Hills Homeowners
A gate that won’t open, won’t close, or makes a grinding sound every time it moves is a problem you want diagnosed correctly the first time. Most gate repairs in Agoura Hills come down to one of five things: a failed motor capacitor, a misaligned photo-eye, a sagging hinge, a limit switch that drifted, or a control board that stopped talking to the remote. We’ve repaired and installed more than 22,000 gates since 2014, and every single job started with a written price before any tool came off the truck. If your gate is acting up, call (424) 388-2906. A live person answers, day or night.
Adrian Vance started this company doing commercial access-control work, and the habit that carried over to residential gates is simple: document what you find. When our technician leaves your property, you get a photo log of every adjustment, a written record of every part number installed, and a gate that works. That’s the entire promise.
What Our Gate Repair Service Includes
Gate repair is not one service. It’s a diagnosis followed by a specific fix, and the fix depends on whether your gate swings, slides, or lifts. Here’s what we handle in Agoura Hills, and what each repair actually involves.
Electric Gate Repair
Electric Gate Repair addresses predictable failures: a capacitor wears out, a relay sticks, a transformer cooks itself, or a wire connection corrodes after years of morning fog and summer heat. What you notice as a homeowner is a gate that hums but doesn’t move, or opens halfway and stops, or trips a breaker every time you use it. Our technicians trace the circuit, test the component, and replace exactly what failed, not the parts around it. You’ll see the failed part and the new part in the photo record we leave behind.
Automatic Gate Repair
An Automatic Gate Repair involves the same machine as an electric gate, but the problem is usually in the automation layer: the motor, the control board, the safety sensors, or the remote receiver. If your gate opens on its own, refuses to close, or only responds to the keypad and not the remote, the issue is in the automation system. We service nine automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so we’re not going to tell you the motor is obsolete just because we don’t stock parts for it. The written quote you get before the repair covers the exact motor, board, or sensor we’re replacing.
Hinge & Post Repair
A gate that drags on the ground or leans noticeably to one side usually needs Hinge & Post Repair. Over time, the weight of a steel gate works against the welds, the post base loosens in its footing, and the hinge pins wear into ovals instead of circles. We cut out the old hinge, weld in a new one, and re-set the post if it’s shifted, so the gate swings level again. In Agoura Hills, this repair is common on the canyon-side properties where gates are heavier and the ground settles over time.
Gate Realignment
Gate Realignment means putting the gate back on the path it was designed to travel. A gate that scrapes the driveway, won’t close fully, or trips its own safety edge every cycle is out of alignment. Sometimes it’s a simple adjustment at the hinge; sometimes the gate frame itself has flexed and needs to be pulled back square. We measure the travel, adjust the stops, and reset the limit switches so the motor isn’t fighting the gate on every open and close. That last part matters: a misaligned gate that still moves is wearing out its own motor, and that’s a much bigger bill later.
Lock Repair
Gate locks fall into two categories: mechanical locks that keep a gate closed, and electric locks that work with the automation system. If your key won’t turn, the latch won’t catch, or the electric strike stopped releasing when the gate opens, the lock needs attention. We repair and replace both types, and if the lock is part of your access-control system, we’ll make sure it’s wired correctly and firing in sequence with the motor. A lock that releases half a second late will eventually tear itself apart.
Weld & Rust Repair
Steel gates in Southern California rust from the inside of the tube first, and by the time you see bubbling paint, the metal underneath is already compromised. We cut out rusted sections, weld in new steel, grind the repair flat, and paint it to match. If the rust is caught early, the repair is small; if the frame has started to crumble, we’ll tell you honestly whether the gate is worth saving. In Agoura Hills, where the marine layer pushes moisture into the canyons, rust repair is one of the most common calls we get outside of motor failures.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We work on whatever motor is already on your property. We service LiftMaster, FAAC, BFT, Mighty Mule, and five other automation brands, and we stock OEM parts for the most common failures on each. LiftMaster is the brand we see most often on residential swing gates in Agoura Hills, and the typical failure is a worn capacitor or a receiver that lost its programming. We carry replacement capacitors on the truck and we photograph the part number before and after.
FAAC and BFT are more common on heavier driveway gates and light commercial properties, and those repairs usually involve hydraulic or electromechanical operators, not the residential chain-drive motors. Mighty Mule is the DIY-brand that many homeowners installed themselves, and those systems are often fixable with a new control board or a properly adjusted limit switch. Whether you have one of these brands or something else entirely, we can diagnose it and price the repair in writing before we start.
BeforeAfterSigns You Need Gate Repair Right Now
- Your gate makes a grinding, squealing, or clicking sound every time it moves. Grinding usually means metal-on-metal contact at the hinge or the chain, and it’s chewing up parts every cycle. Squealing can be a dry bearing or a misaligned drive. Clicking that comes from the control box and doesn’t move the gate usually points to a relay or capacitor failure, and that’s a cheap fix if you catch it before the motor burns out.
- The gate opens halfway and stops, or reverses for no reason. This is a limit switch or photo-eye problem most of the time. The gate thinks it hit an obstacle, so it stops or reverses. The fix is usually an adjustment, not a part replacement, and it takes about an hour.
- The gate starts moving on its own, or the remote stopped working. A gate that moves by itself is a receiver problem or a control board problem, and it’s a safety issue. A remote that stopped working could be a dead battery, but it could also be a receiver that failed or a board that lost its memory. We test all of it and tell you exactly which one failed.
- The gate sags, drags, or doesn’t close completely. When a gate leaves a gap at the latch, it’s not keeping anything in or out. This is usually a hinge or post problem, and it gets worse every month. A gate that drags on the driveway is putting load on the motor that it wasn’t designed to handle.
- The gate trips a breaker, or you smell something electrical near the operator. A tripping breaker means something is drawing more current than the circuit can handle. That’s a short or a dying motor. A burning smell is an emergency: cut power to the operator and call us. Do not keep using the gate. A high-voltage motor or control board failure can be a fire hazard.
Our Gate Repair Process - Step by Step
- 1
You call, and a live person answers. We don’t route you through a voicemail queue. We ask what the gate is doing, we tell you whether it’s an emergency or can wait, and we schedule a technician. You’ll get the technician’s name and photo before they arrive.
- 2
We diagnose the problem and show you what we found. The technician tests the motor, the board, the sensors, and the mechanical hardware. If it’s a limit switch issue, we’ll show you the reading. If it’s a failed capacitor, we’ll test it in front of you. The diagnosis is specific: “the limit switch is set 12 degrees past travel” or “the photo-eye is misaligned by about two inches.”
- 3
You get a written price before any work starts. This is Haven Standard Clause 1: have it in writing. The price is flat, it’s itemized, and it doesn’t change after the technician opens something up and finds a surprise. If the scope changes, the written price changes before the work changes, not after.
- 4
We complete the repair and document everything. Every adjustment, every part number, every reading gets photographed and logged. You get a copy of the record before we leave. If a future problem comes up, no one has to guess what was done in 2024; it’s all in the file.
- 5
We walk the gate with you and confirm it works the way it should. We test the gate through several full cycles, check the safety sensors, and make sure the remote, keypad, and manual release all work. Then we take your payment and leave the gate working. If anything isn’t right within 365 days, we come back and fix it. That’s the Done Right Promise.
How Much Does Gate Repair Cost in Agoura Hills?
A typical gate repair in Agoura Hills runs between $145 and $450, depending on what failed. A photo-eye realignment or limit switch adjustment is on the low end, usually $145 to $195. A hinge replacement on a standard residential swing gate runs $285 to $425. A control board replacement runs $325 to $650 depending on the brand. A full motor replacement on a swing gate typically runs $700 to $1,150. A welded rust repair can run anywhere from $150 for a small patch to $900 for structural frame work.
What affects the price? The brand of the motor, the weight of the gate, the access to the site, and whether the repair is mechanical or electrical. A LiftMaster capacitor swap is inexpensive; a FAAC hydraulic ram replacement is not. The best way to avoid overpaying is to know what failed before you approve the repair, and the best way to know that is a written diagnosis with a photo of the failed part.
Our free estimate includes the diagnostic work. We don’t charge to come out, find the problem, and give you a written price. And if another company already gave you a written estimate, bring it in. We’ll review it at no cost and tell you whether it’s fair, whether it’s overpriced, or whether the diagnosis matches the symptoms you’re describing.
Gate Repair Near Agoura Hills - Our Service Area
We run technicians to homes throughout Agoura Hills, from the neighborhoods off Kanan Road to the properties back against the Santa Monica Mountains. We also cover Gate Repair in Oak Park and Gate Repair in Westlake Village, plus Calabasas, Thousand Oaks, West Hills, and Simi Valley. Most non-emergency repairs are scheduled within one to three days. And because a live person answers the phone 24/7, emergency calls get a technician dispatched the same day, not a recorded message.
Serving Agoura Hills, CA - Our Local Coverage Area
We’re based in the Agoura Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Agoura Hills
Gate repair is the diagnosis and correction of any mechanical, electrical, or structural problem that keeps a gate from opening, closing, locking, or operating safely. It covers motors, control boards, sensors, hinges, posts, welds, locks, and the wiring that connects them. The goal is to fix the specific component that failed, not replace the entire gate.
Most repairs take between one and three hours on site. A sensor realignment or limit switch adjustment is usually under an hour. A hinge replacement or control board swap is one to two hours. A weld repair can take three to four hours because the metal needs to be cut, fitted, welded, and painted. We’ll give you a time estimate with the written price.
Most gate repairs in Agoura Hills run between $145 and $450. The cost depends on what failed: a simple adjustment is on the low end, a control board is mid-range, and a motor replacement is higher. You’ll get a written, itemized price before any work starts, and that price doesn’t change unless the scope changes and you approve it in writing first. Call (424) 388-2906 for a free estimate.
Yes. LiftMaster is the most common brand on residential swing gates in Agoura Hills, and we service those systems regularly. We stock common LiftMaster parts, including capacitors, control boards, and receivers, so most repairs are completed in a single visit. We service eight other automation brands as well, including FAAC, BFT, and Mighty Mule, so your existing motor isn’t a problem.
Yes. Emergency service is available 24 hours a day, seven days a week, and a live person answers the phone at any hour. We dispatch same-day for a gate that’s stuck open, stuck closed, or creating a safety hazard. If the gate is midline and usable, we’ll schedule you for the next available slot and give you options on the phone.
Every repair we complete is covered by the 365-Day Done Right Promise. If the repair isn’t right within a year, we come back and make it right at no additional charge. We also leave you a documented record of every visit: what was found, what was adjusted, and what part number was installed. No other gate company we know of leaves that level of documentation on a residential job.
Clear the area around the gate so the technician has room to work, and make sure the gate is accessible if it’s on a side yard or behind a fence. If you have a keypad, key, or remote, have them ready so we can test everything after the repair. And if you have another company’s written estimate, have it available for review. That’s all you need to do.
Schedule Your Gate Repair Service in Agoura Hills Today
If your gate is making noise, moving wrong, or not moving at all, call (424) 388-2906. You’ll get a live person, a straight answer, and a free estimate with a written price before any work begins. We serve Agoura Hills and the surrounding area 24/7, and every job is backed by the 365-Day Done Right Promise. If it’s not right, we make it right. That’s the deal in writing.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Agoura Hills since 2014.