Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Reseda, CA
Gate access control in Reseda usually means adding or repairing a keypad, intercom, or card reader on a gate that was bolted to a block-wall pilaster 60 years ago. The work here starts with a level and a masonry inspection, because the 1994 Northridge earthquake moved posts 1 to 3 inches out of plumb across this neighborhood. Call (424) 388-2906 and a technician will diagnose the post, the wiring, and the access hardware in one visit.
Why Reseda Homes Are Different
Reseda’s residential blocks date from late-1940s through 1960s tract development, which means most gates hang from poured-concrete or block pilasters that have survived 30 years of thermal cycling and at least one major seismic event. Summer heat inland here runs 105 to 110 degrees, far hotter than the coastal side of the hills, and steel gate frames expand enough in that heat to bind against posts or stress old welds. Santa Ana winds push sustained lateral load on unlatched gate panels, bending hinges and pulling lag bolts from aging mortar. Technicians who work Reseda know to carry a level on every call: a pilaster can look straight and still be 2 or 3 degrees out, which is enough to wreck a magnetic lock or gravity-close latch. Owners rarely know the post moved in 1994.
Our Main Reseda Services
Two services dominate the calls we get from Reseda homeowners, and three more have dedicated pages with deeper detail.
Gate Repair in Reseda
Most repair calls in Reseda trace back to earthquake-shifted posts rather than failed hardware. We check alignment first, then hinges, then the latch and operator. See the full breakdown on our Gate Repair in Reseda page.
Gate Installation in Reseda
New gates in Reseda need posts set for Valley heat expansion and Santa Ana wind load, not just a clean opening. We quote the frame, hardware, and post work in writing. Details are on our Gate Installation in Reseda page.
Gate Motor & Opener in Reseda
Opener work here often means wiring a new motor to an old post that is no longer plumb. We level and brace first, then mount and set limits. Read more on the Gate Motor & Opener in Reseda page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Reseda
Gate access control in Reseda usually means adding or repairing a keypad, intercom, phone-entry, or card reader on a gate that hangs from a 60-year-old block pilaster. The recurring problem here is that a post shifted 1 to 3 inches in the 1994 Northridge earthquake, so a strike plate or magnetic lock that worked for years now sits just far enough out of alignment to fail. We level and true the post before mounting any access hardware, which is why the work holds up through Valley summers. Our Gate Access Control service includes written pricing before work starts and a photo record of every adjustment.
Keypad Entry
Signs you need it
The keypad works intermittently after rain or heat cycles, or one side of the button row stops registering.
What it costs in Reseda
Keypad replacement in Reseda typically runs $150 to $450, and gate access control service calls here usually land between $90 and $250.
How we do it
We test the wiring at the post, check voltage from the operator, and photograph the old and new connections before we leave.
Remote Control
Signs you need it
Remotes work from 5 feet away but not from the street, or one remote works and a second one stopped after a battery change.
What it costs in Reseda
Remote replacement in Reseda typically runs $75 to $150 per transmitter, and gate access control service calls here usually land between $90 and $250.
How we do it
We confirm the receiver frequency, check antenna placement, and program the new transmitter at the panel.
Video Intercom
Signs you need it
The camera picture cuts out when the gate moves, or audio comes through but the unlock button no longer releases the latch.
What it costs in Reseda
Video intercom systems in Reseda typically run $850 to $2,500 installed, depending on wiring condition and panel type.
How we do it
We test the cable run first, mount the camera on a plumb surface, wire the lock relay, and document the whole job.
What Gate Access Control Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Service call and diagnostic (applied toward repair) | $90-$250 |
| Keypad replacement (parts and labor) | $150-$450 |
| Video intercom system installed | $850-$2,500 |
Can you add a keypad to a gate that already has a remote?
Yes. Most motor brands accept an external keypad wired to the operator’s accessory terminal, and we match the keypad to whatever receiver is already on the gate. The price is written before any work starts.
Why does my gate lock work sometimes and not others in Reseda?
In this neighborhood the usual cause is a post that moved in the Northridge earthquake. The strike plate and magnetic lock drift out of alignment by a fraction of an inch, which is enough to make operation inconsistent. Call (424) 388-2906 for an exact quote.
Gate Parts & Welding in Reseda
Gate parts and welding in Reseda usually means a hinge or post that has failed on a block-wall pilaster built in the 1950s or 1960s. Heat expansion in summer and Santa Ana wind loads both stress aging metal, and the failure shows up as a gate that drags, sags, or stops closing. Our Gate Parts & Welding work includes a written parts list and a photo record of every weld and replacement.
Hinge Replacement
Signs you need it
The gate sags at the latch side and scrapes the driveway, or the hinge pin visibly wears thin.
What it costs in Reseda
Hinge replacement in Reseda typically runs $85 to $250 per hinge, installed.
How we do it
We support the gate, remove the old hinge, check the post for cracks, and weld or bolt the new one in place.
Post Replacement
Signs you need it
The pilaster shows hairline cracking, the post leans visibly, or anchor bolts pull loose from the mortar.
What it costs in Reseda
Post replacement in Reseda typically runs $500 to $4,500, depending on post material, depth, and whether core concrete repair is needed.
How we do it
We excavate around the old post, pour a deeper footing sized for wind load, set the new post plumb, and re-hang the gate.
What Gate Parts & Welding Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Hinge replacement (per hinge, installed) | $85-$250 |
| Post replacement (depends on material and depth) | $500-$4,500 |
| General fabrication or repair work (per hour) | $75-$150 |
Can you weld a cracked gate frame in Reseda without replacing the whole gate?
Yes. Most cracks in steel tube or iron frames can be welded, ground, and re-coated as long as the surrounding metal is sound. The written price gets handed to you before the torch comes out.
Do you handle the powder coating after a weld repair?
We can repair the weld and send the gate for coating, or apply a matched rust-inhibiting primer and paint on site. For an exact quote on your gate, call (424) 388-2906.
Brands We Service in Reseda
We work on whatever motor is already mounted on the post, including LiftMaster, Mighty Mule, BFT, and FAAC. Our trucks carry common Reseda parts for all four, which means most opener repairs finish in one visit. See our brands for the full list.
Pricing for Gate Repair in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Gate access control service call and diagnostic | $90-$250 |
| Keypad replacement (parts and labor) | $150-$450 |
| Remote replacement (per transmitter) | $75-$150 |
| Video intercom system installed | $850-$2,500 |
| Hinge replacement (per hinge, installed) | $85-$250 |
| Post replacement | $500-$4,500 |
| General fabrication or repair (per hour) | $75-$150 |
What pushes a Reseda gate price up is the post condition. If the 1994 quake left a pilaster leaning, any hinge, lock, or opener job needs leveling work first, and that shows up as a line item on your written quote. The price we hand you before work starts is the price you pay, no exceptions.
Neighborhoods We Serve in Reseda
Our trucks cover every block of Reseda, from the tract homes along Sherman Way up to the streets bordering Tarzana and Winnetka. Most calls get a same-day or next-day visit.
- Reseda Ranch
- North Reseda
- Reseda Heights
- The blocks around Reseda Park
- East Reseda around the CSUN edge
Service Area - Cities Near Reseda
We also work throughout the surrounding Valley corridors, including Winnetka, CA, Tarzana, CA, Canoga Park, CA, and Chatsworth, CA. Dispatch is coordinated from our Los Angeles office for all local service.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Most Reseda calls get a same-day or next-day visit, depending on the time of day you call. A live person answers the phone 24 hours a day, seven days a week, and your exact arrival window is confirmed before the technician leaves the office. Call (424) 388-2906 to schedule.
Most post replacements on existing residential property do not require a permit, but if the gate sits on a driveway shared with another property, the city may require a check before excavation. We handle the paperwork for the jobs that need it. The written quote reflects any permit fees before work begins.
Yes, directly. Homes built from the late 1940s through the 1960s have block pilasters that have endured quake shifts and decades of heat cycling, and leveling a post before hanging hardware is more involved than working on a newer concrete pillar. The price reflects the actual post condition, not an estimate from a photo. Call (424) 388-2906 for a free estimate on your gate repair in Reseda.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.