Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Chatsworth
Most gate repairs in Chatsworth fall into two categories: the gate that won’t open at all, and the gate that opens but shouldn’t. We fix both, usually the same day we hear from you. Our Chatsworth crews carry linear actuator arms, hinge weld kits, and photo-eyes on the truck because we know what the Santa Susana winds do to a 16-foot ranch gate. Call (424) 388-2906 and a live person answers, day or night.
Why Vance Gate Repair Agoura Hills Is Chatsworth’s Preferred Gate Repair Company
Chatsworth isn’t a one-size-fits-all gate market. A standard suburban swing gate on Devonshire Street has almost nothing in common with a 20-foot dual swing gate on an equestrian parcel off Iverson Road. We dispatch crews who know the difference, and we show up with what the job actually needs.
Since 2014, Adrian Vance has run this company on one rule: write the price down before touching a tool. That means when our tech pulls up to a Chatsworth property, you already know what the repair costs. No verbal estimate, no surprise invoice at the end, no phone call asking you to approve more money mid-job. Haven Standard Clause 1, every visit.
Chatsworth homeowners consistently mention the same thing in reviews: the written price before work starts, and the photo record left behind. Under Clause 4, every visit includes a documented photo log of what was found, what was adjusted, and what was installed. You get a copy. We file one too. If the same gate fails again in a year, the next tech isn’t starting from zero.
The 365-Day Done Right Promise backs every repair. If the work isn’t right, we make it right within that window. No argument, no fee.
Our Gate Repair Services in Chatsworth
Electric Gate Repair
When an electric gate in Chatsworth stops responding, the fault is usually one of three things: the operator’s circuit board, the power supply, or a safety sensor that’s tripped and won’t reset. On equestrian properties, we also see solar-charged battery banks that have degraded in the Valley heat. Our tech reads the fault codes, tests voltage at the operator, and photographs the readings before and after. You get a written record of exactly what was wrong. Call (424) 388-2906 and we’ll dispatch a technician to your Chatsworth property.
Automatic Gate Repair
Automatic gates on Chatsworth horse properties carry a load most residential gates never see. A dual swing gate spanning 18 feet for trailer clearance presents enormous wind drag during Santa Ana events. When the operator’s gear motor burns out, it’s often because the gate was being pushed against its own limit switch by a 50 mph gust. We replace the motor, then set the force limits and travel parameters correctly for the gate’s actual mass and wind exposure. A gate operator that’s been fighting the wind needs different settings than one sheltered in a quiet cul-de-sac.
Hinge & Post Repair
This is the repair we do most often in Chatsworth after wind events. Hinge lag bolts strip from aged wooden posts, hinge pins shear, and swing-arm brackets bend. On a 1950s ranch property near the Chatsworth Reservoir, the original posts may be 60 years old and never rated for a motorized gate. We reset post footings, weld reinforcement plates where the hinge sits, and replace lag bolts with through-bolts and backing plates when the post can’t be saved. If the post itself is rotten or split, we’ll tell you plainly and give you a written price to replace it.
Gate Realignment
A gate that drops, drags, or needs a shove to close is out of alignment. On heavy wrought-iron gates common throughout Chatsworth, alignment problems come from sagging hinges, settled posts, or wind warping of the gate panel itself. We don’t just lift the gate and call it done. We measure the reveal gap, check clearance at both ends, photograph the misalignment, and correct the cause. Sometimes that means shimming a hinge. Sometimes it means cutting and re-welding a corner. Either way, the price is written before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Chatsworth
Vance services nine gate-automation brands, including FAAC, BFT, Linear, and Viking. That matters in Chatsworth because ranch properties often have older operators still doing their job. We don’t steer a customer toward replacing a good Linear arm just because the photo-eye needs realignment. We repair what’s on the property. Our trucks are stocked with common swing-arm brackets, control boards, and safety sensor kits for the brands we service. If your Chatsworth gate has an operator we know well, parts usually arrive same-day or next day from our Los Angeles supply channels.
Common Gate Repair Problems We See in Chatsworth Homes
- Santa Ana wind damage to wide gates. The Santa Susana Pass funnels wind directly into Chatsworth, and an 18-foot gate acts like a sail. Hinge pins shear, lag bolts strip from wooden posts, and gate panels warp or crack.
- Burned-out gear motors on oversized ranch gates. Older operators were never rated for a 20-foot dual swing gate under sustained wind load. The motor runs hot, then dies. We see a concentrated burst of these calls within 48 hours of a strong wind event.
- Missing or non-functional safety reverse. Many Chatsworth gates predate modern UL 325 standards. Older installations may have no photo-eyes or an inconsistent auto-reverse. This is a safety problem, not just a convenience issue. We can add photo-eyes to most existing operators without a full replacement.
- Solar panel and battery failures on A1 zoned parcels. Where running mains power to a gate hundreds of feet from the house isn’t practical, Chatsworth properties rely on solar-charged systems. The Valley’s heat shortens battery life, and dirty or degraded panels fail to replenish the charge. Operators then run intermittently or not at all.
Pricing for Gate Repair in Chatsworth, CA
Every price is quoted and agreed before any work starts. You get it in writing. No discovery calls, no “while I’m here” add-ons that inflate the invoice. If another company gave you a written estimate, bring it in. We’ll review it at no cost.
| Repair Type | Typical Chatsworth Price Range |
|---|---|
| Hinge & Post Repair (single gate) | $280-$520 |
| Gate Realignment | $180-$340 |
| Electric Gate Diagnosis & Repair | $220-$480 |
| Gear Motor Replacement (heavy dual swing) | $650-$1,400 |
| Solar Battery Replacement (each) | $180-$360 |
We Also Serve Cities Near Chatsworth
If you’re in Winnetka, Canoga Park, Reseda, or West Hills, our Gate Repair crews cover those areas with the same written pricing and documented records. For this page’s specific local details, see our Chatsworth coverage. Dispatch is coordinated from our Los Angeles office; technicians serve each neighborhood locally.
Serving Chatsworth, CA - Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Chatsworth
Why do my Chatsworth swing gates keep going out of alignment after Santa Ana winds?
Your gates likely go out of alignment after Santa Ana winds because the gate panel’s surface area catches the gust and transfers that force into the hinges and posts, gradually bending brackets and pulling lag bolts loose from the wood. The fix that lasts is usually a heavier hinge weld kit and reinforcing the post connection, not just re-hanging the gate. Call (424) 388-2906 and we’ll measure the reveal gap and photograph the hinge point before touching anything.
My 18-foot ranch gate predates modern safety laws-can you add photo-eyes without replacing the operator?
Yes, in most cases we can add photo-eyes to an existing operator without replacing it. Photo-eyes are the infrared beam that stops the gate if something crosses the path, and they’re a UL 325 safety requirement on all automatic gates. If your existing Chatsworth operator is still functional, we can usually wire new safety sensors into the control board for a few hundred dollars rather than replacing the motor. The exact price depends on the operator brand and how far the sensor run is from the controller.
Do you handle solar gate openers for driveways far from the house on A1 zoned parcels?
Yes, we service solar-powered gate openers on Chatsworth equestrian and A1 zoned parcels. Solar gates are common where running conduit hundreds of feet from the house isn’t practical. We diagnose panel output, battery condition, and charge controller function. When the panel is dirty or degraded from Valley UV exposure, output drops below what the operator needs, and the gate runs intermittently or fails. We’ll test the entire solar loop and tell you exactly what’s failing.
What is the most common gate repair you do after a wind event in Chatsworth?
The most common post-wind repair we make in Chatsworth is replacing sheared hinge pins and stripping lag bolts on wide equestrian swing gates. The Santa Susana Pass funnels gusts directly into the northwest edge of Chatsworth, and a 16-20 foot gate on an exposed driveway takes the full force. We stock extra linear actuator arms and heavy-duty hinge weld kits heading into the October-December Santa Ana season specifically for this reason. If your gate is still standing after a wind event but dragging or sagging, call (424) 388-2906 before the next gust finishes the job.
Can you realign a 20-foot dual swing gate without replacing the original wrought-iron panels?
Yes, in almost all cases the original wrought-iron panels can be kept. The panels themselves rarely fail; the alignment problem is usually in the hinge plates, the post, or the operator’s travel limit. We measure the gap, find the point of drift, and correct it with welding or shimming. If a panel has been warped by wind, we can often straighten it in place rather than cutting and replacing it. The written price includes exactly what we’ll do before we start.
Call for a Free Estimate in Chatsworth
If your Chatsworth gate needs repair, call (424) 388-2906 and a live person answers. Tell us what’s happening, and we’ll give you a written price before any work starts. If the gate is stuck open or stuck closed, call now. We dispatch technicians to Chatsworth throughout the week, and a background-checked, uniformed tech arrives with a name and photo sent before arrival. Free second opinions on any written estimate from another company.
Written by Adrian Vance, Owner at Vance Gate Repair Agoura Hills, serving Chatsworth since 2014.
Gate Repair in Nearby Areas
