Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tarzana
New gate installation in Tarzana runs $3,800-$14,500 for most residential work, and we quote the full written price before any material gets ordered. Custom ornamental gates on the hillside lots south of Ventura Boulevard sit at the top of that range, because the ground they stand on doesn’t stay put. We send background-checked, uniformed technicians into Tarzana from our Los Angeles dispatch office, and a live person answers the phone 24 hours a day. If you’ve got an old post pulling loose or need Gate Repair - Tarzana, call (424) 388-2906 and we’ll get someone out to measure it.
Why Vance Gate Repair Agoura Hills Is Tarzana’s Preferred Gate Installation Company
Tarzana customers call us for two reasons. The first is that we hand over a written scope and a written price before anyone picks up a tool. No verbal estimate, no end-of-job invoice that looks nothing like the conversation at the door. That’s Clause 1 of the Haven Standard, and it applies to every job we do in Tarzana, from a simple pedestrian gate to a 350-pound custom double swing gate.
The second reason is what we leave behind: a photographed record of every post footing, every limit-switch reading, every part number installed. Adrian Vance built this company on commercial access-control documentation, and we brought that habit to residential gates. When your Tarzana gate needs service six years from now, the next technician won’t have to guess how the wiring was run, because we already wrote it down. And under the 365-Day Done Right Promise, if our installation isn’t right, we make it right at no additional charge.
We also work on whatever operator is already on the property. LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, Mighty Mule. If you’re installing a new gate and want to keep your existing motor, we’ll wire to it. If the motor is dead and the gate is fine, we won’t push you to replace both.
Our Gate Installation Services in Tarzana
Our Gate Installation team handles the whole range in Tarzana. Most of what we install on the hillside streets south of Ventura falls into four categories:
Driveway Gate
A driveway gate in Tarzana isn’t just curb appeal; it’s the first physical layer between your property and the street. We install slide and swing configurations, set posts in concrete footings sized for the soil they’re going into, and wire in safety edges and photo-eyes so the gate meets current entrapment standards. On a decomposed granite slope, that means deeper footings and rebar cages, not the shallow pours that work on a flat Encino lot.
Pedestrian Gate
Pedestrian gates in Tarzana run from simple tubular steel walk gates to matched ornamental iron entries beside a main driveway gate. We hang them on adjustable hinges, set the latch to strike clean every time, and if you want it on the same access system as the driveway, we can run keypad or intercom wiring to both. A pedestrian gate that drags or won’t latch is a security hole, not a minor annoyance.
Sliding Gate
Sliding gates are the right answer for a lot of Tarzana driveways, especially where the apron is steep enough that a swing gate would need level ground to open into. Where a swing gate gets wider, a slide gate just gets a longer track. We install cantilever and V-track systems, and we set the rack and pinion so the gate doesn’t bind when a 108°F afternoon throws steel into thermal expansion.
Swing Gate
Swing gates are the default on Tarzana’s hillside estates, and they fail in predictable ways when the posts move. The hinge posts lean inward as decomposed granite shifts, the latch side drops, and the gate starts dragging across the driveway. We pull the old posts, pour proper 24-inch footings with rebar, and re-hang the gate so it swings square. If an obsolete operator is controlling it, we’ll show you the wiring before we touch anything.
Double Gate
A double swing gate doubles the number of posts, hinges, and latch points, which means it doubles the ways the ground can gradually pull it out of square. We install double gates with matched leaf weight and travel so both sides open and close as one, and we photograph the alignment at every step. On a 1990s Tarzana estate with a heavy wrought-iron double gate, an hour of patient adjustment matters more than a bigger motor.
Security Gate
Security gates in Tarzana usually mean a heavier frame, welded pickets or ornamental bars, and an access system that actually gets used every day. We install them with hardened hinges, steel posts set deep, and whatever entry hardware makes sense for the property: keypad, intercom, camera integration, or all three. We also wire the safety loop the same way we would on a commercial site, because a gate that stops closing when a child is in the path isn’t optional.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tarzana
We install and service nine major automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That matters in Tarzana because we don’t have to steer you toward a replacement motor just because it’s the only one we stock. If your existing Viking or Linear operator is still serviceable, we’ll work with it. If it isn’t, we’ll show you why, in writing, with the failed part in the photo log. Our Tarzana customers get the same brand coverage as our commercial clients, with zero pressure to swap brands.
Common Gate Installation Problems We See in Tarzana Homes
- Lean and bind from decomposed granite settling. The hillside soil south of Ventura Boulevard never really stops moving. Hinge posts set 30 years ago in shallow footings have drifted out of plumb, and the gate now drags or won’t latch. We see this on nearly every hillside install we replace.
- Obsolescent operators from the late ’80s and early ’90s. Viking and Linear units spec’d when these estates were built are now orphaned. Replacement boards and circuit cards aren’t carried by regional distributors anymore, so the fix is a full operator swap, not a repair. We’ll tell you that before you spend money on a service call.
- Thermal expansion binding on south-facing gates. Steel expands in 105-110°F Valley heat, and a gate that clears its post by half an inch in the morning can bind by 2 p.m. We set clearances with that exact thermal range in mind, not the morning temperature on install day.
- Santa Ana wind forcing on wide swing gates. A 14-foot double gate is a sail. Lateral force from Santa Ana events bends hinges and yanks anchor posts loose. We overbuild the hinge hardware and post embedment on wide gates in Tarzana specifically because the wind will come back every October.
Pricing for Gate Installation in Tarzana, CA
Here’s what Tarzana gate work actually costs in our experience:
- Single swing driveway gate, standard tubular steel: $3,800-$6,200 installed, including posts, hinges, and a basic operator wiring run.
- Double swing driveway gate, ornamental iron: $7,500-$12,800 installed, depending on leaf weight, hinge hardware, and access system integration.
- Sliding gate with V-track and operator mounting: $5,200-$9,400 installed, plus trenching for the power and safety loop.
- Pedestrian gate, matched to existing ironwork: $1,900-$4,100 installed and hung on adjustable hinges.
- Full operator swap on a legacy Viking or Linear system: $1,800-$4,200, including new motor, safety photocells, limit setup, and the written record of every setting.
Every one of those numbers gets written down and handed to you before any work begins. That’s the Haven Standard, and it’s non-negotiable. We don’t ask you to call for a quote, because the quote is the point. Call (424) 388-2906 and we’ll measure, spec, and price the job in writing. The estimate is free, and so is a second opinion on any competing written bid.
We Also Serve Cities Near Tarzana
Our gate installation work regularly takes us into Reseda, Winnetka, Canoga Park, and West Hills. The same written-price standard and documented photo record apply everywhere we go, and Gate Installation in Tarzana benefits from having local crews who know the Valley’s heat, soil, and housing stock without a geography lesson on every job.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tarzana
The decomposed granite soil on those slopes shifts and settles over decades, so a shallow post pour that works fine on the valley floor will gradually let the gate lean and bind. In Tarzana we set hinge posts in concrete footings 24 inches deep with rebar cages, sized to the gate’s weight and the slope’s grade. That’s the difference between a gate that stays square for 20 years and one that starts dragging in five. Call (424) 388-2906 for a free site assessment; we’ll measure your slope and give you a written spec.
Yes. We take measurements and photographs of the existing ironwork, then spec the new gate to match the picket profile, spacing, and finish. We work with local fabricators in the San Fernando Valley who do custom ornamental work, and every fabrication drawing gets approved by you before the metal is cut. The matched gate gets its own photo log and written record, same as any other install.
In most cases, yes, and we’ll show you why in writing. The control boards and circuit cards for those legacy Viking and Linear units from the late ’80s and early ’90s are no longer stocked by regional distributors, so repair isn’t a realistic option. The good news is that the gate itself is usually fine, and a full operator swap onto your existing slide gate typically runs $1,800-$4,200. We’ll photograph the dead board, install the new operator, and leave you with the complete wiring record. Call (424) 388-2906 and we’ll confirm the diagnosis and give you a written price before ordering anything.
Steel expands in heat, and a gate that clears its post by half an inch at 8 a.m. on a cool morning might bind hard by 2 p.m. We set installation clearances and rack-and-pinion mesh using the real summer temperature range in Tarzana, not the weather on the day we show up. We also torque hinge hardware to spec so thermal cycles don’t loosen it over the first season. The gate has to work at 110°F, or it doesn’t work.
Yes, and it’s not negotiable. Current UL 325 standards require monitored safety devices on automated gates, which in practice means photo-eyes, safety edges, or both, depending on the gate type and installation. We install matched obstruction protection on every gate we put in, and we photograph every safety device and its test results as part of the job record. That’s a safety requirement, not an upsell. Call (424) 388-2906 if you want us to inspect an existing gate for entrapment compliance; we’ll put the findings in writing.
Call Vance Gate Repair for Gate Installation in Tarzana
If you need a new gate in Tarzana, you need a written price, a spec that accounts for your slope and soil, and a crew that isn’t guessing. We’ve installed and repaired over 22,000 gates since 2014, and every one of them got the same treatment: written scope, written price, and a photograph of what we found and what we left. Call (424) 388-2906 for a free estimate. A live person answers 24 hours a day, seven days a week, and we’ll tell you exactly what the job costs before anything gets ordered.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Tarzana and the surrounding San Fernando Valley.