A Vance company - serving Agoura Hills, CA

FAAC Keypad & Intercom Repair Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

FAAC Keypad & Intercom Repair: The Agoura Hills Owner’s Guide

We repair and replace FAAC keypads and intercoms in Agoura Hills, with most jobs priced between $285 and $520 installed, and we stock the common FAAC compatible keypads and intercom modules on the truck so most repairs are completed the same day we arrive. The part that fails is rarely the keypad itself but the wiring behind it or the receiver board it talks to, which is why a good repair starts with testing, not swapping. Most owners in Agoura Hills discover the failure the same way: the gate works fine from the remote or the vehicle sensor but the keypad has gone dead, or it eats codes, or the intercom buzzes but won’t release the gate.

Call (424) 388-2906

Which FAAC Models This Applies To

We work on keypads and intercom panels across the FAAC residential and light commercial lines you’ll actually find on Agoura Hills driveways: the 415, 390, 400, 412, 770, and the older 455D setups, along with FAAC’s DigiKey, DecoKey, and RP series keypad models. The compatibility gotcha most people don’t know is that FAAC keypads have changed their wiring protocol between generations, so a keypad that fits the mounting box may not talk to the older control board, and we check the board revision, not just the part number, before we order or install anything. For intercom panels, the FAAC XKP and entry phone modules run on a separate power supply that fails silently more often than the audio circuit does, and we carry both OEM FAAC parts and quality aftermarket equivalents matched to the specific board revision on your gate.

Signs Your FAAC Keypad & Intercom Repair Is Failing

Technician repairing a damaged metal gate post with epoxy putty
Signs Your FAAC Keypad & Intercom Repair Is Failing
  • Dead keypad with no backlight or beep. This usually means no power is reaching the keypad, often a failed inline fuse or a corroded power connection, not a bad keypad itself.
  • Keypad codes stop working, but the remote still opens the gate. The keypad sends its signal through a separate input on the FAAC board; if that input has failed or the wiring loosened, the remote still works but the keypad is ignored.
  • Intermittent code acceptance, works some days and not others. In Agoura Hills, this pattern shows up a lot along the hillside corridors where temperature swings and dust work connections loose; a connection that’s barely making contact will pass or fail depending on the day.
  • Intercom audio is present but the release button doesn’t open the gate. The audio and the relay are separate circuits inside the intercom; a failed relay or a blown driver on the intercom board is a common failure we replace on the spot.
  • Keypad or intercom works, but only when the gate is in a certain position. This points to a wiring fault that’s being flexed or pinched by the gate’s movement, and it’s one we specifically check for because it looks like an electronics problem but is usually mechanical.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

In Agoura Hills, a complete FAAC keypad replacement typically runs $285 to $390 installed, while a full intercom replacement with wiring repair lands between $390 and $520, depending on the FAAC model revision and whether we’re pulling new wire or reusing existing runs. You get a written price before any work starts, and the line items show the part cost separately from the labor, so you can see exactly what you’re paying for rather than a bundle nobody can explain. Every keypad or intercom repair we do is covered under the 365-Day Done Right Promise: if it’s not right, we make it right at no charge, and we leave you a photo log of what we found, what we replaced, and the part number we installed.

DIY or Call Us?

Technician using an angle grinder for professional metal gate repair
DIY or Call Us?

There are two things an owner can safely check before calling: confirm the keypad or intercom is getting power by checking the breaker and any inline fuse, and look for visible damage to the wire run at the gate hinge, which is where Agoura Hills dust and movement do their worst. What we’d caution against is opening the FAAC control board enclosure if you’re not familiar with it, the board carries live voltage even with the gate breaker off, and the inputs are sensitive enough that a stray wire contact can fry the very board you’re trying to diagnose. Several keypad failures we see start as a wiring repair that went wrong; if the keypad is dead and the fuse is fine, call us at (424) 388-2906 and we’ll test the board before anything gets replaced.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Gate Repair help in Agoura Hills? Licensed & insured · 1-hour response · free estimates
Call (424) 388-2906
Local Service Coverage

Request a Free Estimate in Agoura Hills

Tell us what you need - Vance Gate Repair Agoura Hills responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch